How To Re-write Articles?

by SRLee
17 replies
Recently, I spent around 4 hours rewriting one seed article, paragraph-by-paragraph, sentence-by-sentence, word-by-word.

I created 9 articles out of the seed, making a total of 10 articles generated within 4 hours, or around roughly 24 minutes per article.

All 9 has 30% or lower duplicate content when compared with the seed article, which is good. But here's the problem. Between all 9, only 2 had 30% or lower duplicate content. The other 7 had 60% or higher duplicate content.

I was totally frustrated, since I spent 4 hours or more on this. Any tips on how to rewrite articles? I'm using Power Article Rewritter by the way.

All help appreciated, thanks!

EDIT: I rewrite my own articles. I write the seed article, and spin it later.
#articles #rewrite
  • Profile picture of the author Jaspworld
    Even when you try to rewrite a article start from scratch. Look at a article, read it, understand it, now go to a different room and rewrite the articlr from your memory.
    Signature

    {{ DiscussionBoard.errors[1043007].message }}
  • Profile picture of the author Ron Killian
    Sure I am not the only one, but I just open the article in notepad then open another instance of notepad. Put them side by side and rewrite paragraph by paragraph into the second notepad. Also tried doing it in two open note pads. Works pretty good for me.
    Signature
    PLR Affiliate Program Has Launched! Easily Promote Over 5,000 PLR and MRR Products.

    Largest Selection of PLR Articles on the Planet! PLR Ebooks, PLR Video, PLR Websites and more with Private Label Rights
    {{ DiscussionBoard.errors[1043527].message }}
    • Profile picture of the author Dreams
      I had the same problem I found myself rewriting one article over days! Then using a spinner I only had around 17% uniqueness for each spun article!
      {{ DiscussionBoard.errors[1043540].message }}
      • Profile picture of the author ExRat
        Hi,

        I see this question almost every day and no-one seems to see it as I do, or at least - those who leave a reply.

        a) what evidence do you have to suggest that the method you are using to measure uniqueness is accurate?

        b) what evidence do you have to suggest that the amount of uniqueness you are using as a standard is accurate and relevant?

        c) what evidence do you have to suggest that any of this is going to help you to achieve what you want to achieve?

        The best way to establish evidence is to -

        1) follow your gut instinct

        then...

        2) test it for yourself

        My point - so many people are blindly following advice from somewhere and assuming that the methods that they are using to measure their results are accurate.

        Trust yourself (your gut) and trust the hard evidence that you produce yourself - nothing else.

        You could be wasting time. LOTS of it. If so, that goes against the fundamental reason for spinning in the first place. Does it not?
        Signature


        Roger Davis

        {{ DiscussionBoard.errors[1043754].message }}
  • Profile picture of the author SRLee
    Thanks for all the replies!

    ExRat, what do you mean by follow your gut instinct and test it for yourself?

    I wrote the seed article myself, and it's not that I could not produce other unique articles compared to the seed, it's the spun articles that are having big-time duplicate content.

    Once again, thanks to everyone!
    {{ DiscussionBoard.errors[1043868].message }}
    • Profile picture of the author ExRat
      Hi SRlee,

      ExRat, what do you mean by follow your gut instinct and test it for yourself?
      I reckon they're kind of self-explanatory (bearing in mind what else I said). But I'm not trying to be clever/funny (I'm trying to be helpful) when I say - if you answer my questions, I'll answer yours.

      a) what evidence do you have to suggest that the method you are using to measure uniqueness is accurate?

      b) what evidence do you have to suggest that the amount of uniqueness you are using as a standard is accurate and relevant?

      c) what evidence do you have to suggest that any of this is going to help you to achieve what you want to achieve?
      Signature


      Roger Davis

      {{ DiscussionBoard.errors[1043881].message }}
  • Profile picture of the author SRLee
    In response to ExRat, here are my closest answers:

    a) what evidence do you have to suggest that the method you are using to measure uniqueness is accurate?

    DupeFreePro does all the article-checking for me.

    b) what evidence do you have to suggest that the amount of uniqueness you are using as a standard is accurate and relevant?

    Bryan told me that EZA accepts articles with 30% or lower duplicate content, and search engines accept articles with 70% or lower duplicate content.

    c) what evidence do you have to suggest that any of this is going to help you to achieve what you want to achieve?

    More articles naturally means more traffic, which then converts into profits.

    It's not an easy task. @.@
    {{ DiscussionBoard.errors[1045147].message }}
    • Profile picture of the author peter gibson
      Originally Posted by SRLee View Post

      In response to ExRat, here are my closest answers:

      a) what evidence do you have to suggest that the method you are using to measure uniqueness is accurate?

      DupeFreePro does all the article-checking for me.

      b) what evidence do you have to suggest that the amount of uniqueness you are using as a standard is accurate and relevant?

      Bryan told me that EZA accepts articles with 30% or lower duplicate content, and search engines accept articles with 70% or lower duplicate content.

      c) what evidence do you have to suggest that any of this is going to help you to achieve what you want to achieve?

      More articles naturally means more traffic, which then converts into profits.

      It's not an easy task. @.@
      God I hope I'm misunderstanding the part I've outlined in red. BTW, who is Bryan?

      My man, it's looking like you have a very perverted outlook on article marketing and submissions. I can almost see by the way you're writing this that someone has misled you, either on purpose or due to their own maligned view.
      {{ DiscussionBoard.errors[1045565].message }}
  • Profile picture of the author abelacts
    If you don't mind, you can read this article I posted sometime ago:

    How To Use And Rewrite PLR Articles ? A Video Tutorial

    It's also about a video by an excellent writer.
    {{ DiscussionBoard.errors[1045152].message }}
  • Profile picture of the author BoDSN
    I often read several articles about the same subject. I read them, then writing down keywords from what I remember, then I write the article using the keywords. Sometimes; I can write more than one article which is great. I think you'll be much faster in your re-writes once you get familiar with the process.
    {{ DiscussionBoard.errors[1045155].message }}
  • Profile picture of the author SRLee
    Original post updated with more precise details.

    I rewrite my own articles, if that helps.
    {{ DiscussionBoard.errors[1045450].message }}
  • Profile picture of the author HenryEspinosa
    Just get your young family members to do it for you or outsource it. I find that the easiest even when I give them the articles to re summarize...
    {{ DiscussionBoard.errors[1045550].message }}
    • Profile picture of the author SRLee
      Originally Posted by HenryEspinosa View Post

      Just get your young family members to do it for you or outsource it. I find that the easiest even when I give them the articles to re summarize...
      I can't bear the costs of outsourcing, since I live in Malaysia.

      And since the conversion is USD1:MYR3.6, the price is high, not to mention I'm not even an adult yet.

      I could try asking my younger brother for the rewrites though, but I think he wouldn't do it.
      {{ DiscussionBoard.errors[1045569].message }}
  • Profile picture of the author Jon Alexander
    have you thought about using http://www.autojetspinner.com?

    Here's what it does to your post in 3 seconds flat:-

    {Late|Recent|Latter}ly, I spent around {four|4} hours re{-phras|-writ|writ}ing one seed article, paragraph{-by-| by }paragraph, sentence{ by |-by-}sentence, word{-by-| by }word. I {made|created} {9|nine} articles out of the seed, making a total of {ten|10} articles generated {within|inside} {4|four} hours, or around {rough|approximate}ly {24|twenty-four} min{ute|}s per article. All {nine|9} has {30 percent|30%|thirty percent} or lower {duplicate|copied|reused} content when compared {with|to} the seed article, which is good. But here's the {problem|difficulty|issue}. Between all {nine|9}, {only 2|only two|just two} had {30 percent|thirty percent|30%} or lower {non-original|reused|duplicate} content. The other {7|seven} had 60% or higher {non-original|reused|duplicate} content. I was {complete|total|ful}ly {annoyed|frustrated|pissed off}, since I spent {4|four} hours or more on this. Any {recommendations on|tips about|tips on} how to re{vise|vamp|write} articles? I{'m| am} using Power Article Rewritter {by the way|incidentally|BTW}.


    if you use the new jets spinner enhancements (randomizer %) you can vastly increase the 'difference' anytime you like...
    Signature
    http://www.contentboss.com - automated article rewriting software gives you unique content at a few CENTS per article!. New - Put text into jetspinner format automatically! http://www.autojetspinner.com

    PS my PM system is broken. Sorry I can't help anymore.
    {{ DiscussionBoard.errors[1045881].message }}
    • Profile picture of the author SRLee
      Originally Posted by Jon Alexander View Post

      have you thought about using Automatic Jet Spinner Software to rewrite your articles instantly

      Here's what it does to your post in 3 seconds flat:-

      {Late|Recent|Latter}ly, I spent around {four|4} hours re{-phras|-writ|writ}ing one seed article, paragraph{-by-| by }paragraph, sentence{ by |-by-}sentence, word{-by-| by }word. I {made|created} {9|nine} articles out of the seed, making a total of {ten|10} articles generated {within|inside} {4|four} hours, or around {rough|approximate}ly {24|twenty-four} min{ute|}s per article. All {nine|9} has {30 percent|30%|thirty percent} or lower {duplicate|copied|reused} content when compared {with|to} the seed article, which is good. But here's the {problem|difficulty|issue}. Between all {nine|9}, {only 2|only two|just two} had {30 percent|thirty percent|30%} or lower {non-original|reused|duplicate} content. The other {7|seven} had 60% or higher {non-original|reused|duplicate} content. I was {complete|total|ful}ly {annoyed|frustrated|pissed off}, since I spent {4|four} hours or more on this. Any {recommendations on|tips about|tips on} how to re{vise|vamp|write} articles? I{'m| am} using Power Article Rewritter {by the way|incidentally|BTW}.


      if you use the new jets spinner enhancements (randomizer %) you can vastly increase the 'difference' anytime you like...
      Hi, I just checked out this incredible piece of software!

      But it's a paid subscription service. Thanks for such a great recommendation, though!
      {{ DiscussionBoard.errors[1045925].message }}
  • Profile picture of the author fthomas137
    Many comments already, but I'd like to offer my 10 cents worth. When re-writing an article, you have take each sentence and re-write it 3 times. Don't spend too much time. I find that I can create a spinnable and understandable article set in under an hour. I've created up to 100 replicas and only had two that were less then 30% original.

    I do find that if I put in two layers of options with the three sentences, this helps greatly as well.

    For example:

    Original:
    I love to go lawn bowling simply because it's an easy and fun sport.
    Version two:
    Lawn bowling is a favorite sport of mine as I really enjoy it and it's dead easy to do.
    Version three:
    I always take advantage of opportunities to participate in a sport that I love; lawn bowling.

    Ok, I'll now take on of the sentences and look for alternative words:
    I [love to go|enjoy going|look forward to going} lawn bowling simply because {it's| it is} an {easy and fun|fun and easy} sport.

    Make sense?

    Frank
    {{ DiscussionBoard.errors[1045904].message }}
    • Profile picture of the author SRLee
      Originally Posted by fthomas137 View Post

      Many comments already, but I'd like to offer my 10 cents worth. When re-writing an article, you have take each sentence and re-write it 3 times. Don't spend too much time. I find that I can create a spinnable and understandable article set in under an hour. I've created up to 100 replicas and only had two that were less then 30% original.

      I do find that if I put in two layers of options with the three sentences, this helps greatly as well.

      For example:

      Original:
      I love to go lawn bowling simply because it's an easy and fun sport.
      Version two:
      Lawn bowling is a favorite sport of mine as I really enjoy it and it's dead easy to do.
      Version three:
      I always take advantage of opportunities to participate in a sport that I love; lawn bowling.

      Ok, I'll now take on of the sentences and look for alternative words:
      I [love to go|enjoy going|look forward to going} lawn bowling simply because {it's| it is} an {easy and fun|fun and easy} sport.

      Make sense?

      Frank
      Yeah, it does Frank.

      I am in the progress of attempting to spin another seed article I wrote days ago. I found out that by spinning paragraph-by-paragraph, I just add unnecessary work load to myself. Thus, I will try to spin only sentences and words(just like what you suggested).

      I hope to achieve success like yours, Frank! I mean, 98 unique articles from one seed article under 60 minutes is a godly achievement to me!

      Regards,
      Shaun
      {{ DiscussionBoard.errors[1045936].message }}

Trending Topics