Anybody good at spinning articles that you can recommend?

Here's your dilemma...

You don't want to do it because it takes too long which is
understandable. It's also a mind-bending task. Right? I know
because I've done it.

I've hand-written and hand-coded articles for spinning. I did
it very well, for someone else. Not for me.

A 500 word article, well-researched, well-written, and hand-
coded for spinning took me about 5 hours. It sucked. But...

The spun articles were a killer. The guy reported back up to
65% unique, and he was happy as hell until he got my bill. I
did a few more for him, but he didn't want to pay for that level
of spinning craftsmanship.

That's the other half of your dilemma. So...

How much do you want something like this?

That's the question you need to answer.

The sentence spinning is what makes this a more difficult and expensive one. If you just kept it to word and phrase spinning then it would be alot quicker and alot easier to do (as well as of course cheaper).

Was a guy here doing it for $2 an article i think i saw the other day (search) but not sure how good, or how long he takes!

Mark Blaze

P.S. Why do you even need the sentences to be spun as well as words and phrases?

If you are looking for someone that can do the spinning for you and get around 70%+ in uniqueness then I can point you to someone that loves to spin articles and they are very good at it...

Let me know ..

James

The humanrewriter.com has changed their interface a little. I would go back and try it again. I have had them do rewrites for me and have found them to be very good. My only problem with them is they always seem to be backlogged. But the only reason for that is that they do a good job and are busy, so obviously they are busy.

I do article rewriting and spinning for several clients. I use Best spinner and send them the syntax. I also rewrite manually. I sent you a PM

Belinda

If anyone does article spinning using "the best spinner", please PM me your price lists. I'm looking.

Re's
Rob Whisonant

Try the "warriors for hire" section. There's a lot of people who can help you there.... Goodluck......

Though it looks easy to spin articles,
especially using good spinning tools like
my ArticlesCRUSH and theBestSpinner.com,
it's actually VERY DIFFICULT to get good
results because of the MANUAL process
involved. One has to spend tons of time to
do the manual work of either rewriting the
sentences/paragraphs a couple of times or
adding synonyms/phrases to the words in
the article. It's actually FAR MORE work
than just writing a new article.

So, while looking for a good spinner you
have to take these factors into
consideration. It's not just enough to put
different synonyms in an article now,
what's most important is how well will
the finished spun articles read? As good
spinners know, a synonym that goes
very well and reads very well in one
instance won't in another instance.

So - I guess it strongly holds true with
article spinning that...

"You GET What You PAY for",

Kingsley

Hi,

Did you manage to find someone who is good at spinning articles because I really could do with someone to spin some articles for me.

Thanks
Neil

Hi,

The problem with all the spinners on the market at present that I have come across is that they give the user no capabilities of editing / massaging the spun articles before they are produced; if the spun articles are then dispersed as they are, without checking each individual article first, then inevitably some of the articles will have certain problems where a particular word / phrase does not marry well with the words / phrases before and after it, and thus the article doesn’t read well which is a complete turn-off to the reader.

If a user has to check all spun articles before releasing them then, at a rough guess, I would estimate that it would take at least 5 minutes per article to proof-read and edit any problems; if 200 spun articles are produced, then the user would have to spend 200 * 5 minutes which is 16.67 hours before the articles would be considered to be quality articles, and this is not taking into account the boredom factor of having to check over 200 articles which are a variation of a single article.

I’ve been developing an article spinner over the last year or so and my Ace Spinner has something very useful to offer; it allows the user to have total control over how the articles are building up before they are actually produced and to easily edit any part of any of the 216 articles by use of its superb editing facilities.

The Ace Spinner works on having 6 variations for each word / phrase and instead of randomly selecting a choice from the 6 variations it gives every combination of 3 consecutive word / phrase sets which is why it produces 216 articles (6 * 6 * 6).

After each change is made, the ACE SPINNER re-spins the articles and this ensures that once a problem has been identified and fixed, then that particular problem will not occur in any of the spun articles.

I am presently looking for a Joint Venture partner to help with the marketing of my Ace Spinner but in the meanwhile I would be interested in spinning your articles as a service. Please feel free to PM me if you would be interested to discuss this more.

Please note that I am offering to spin your articles as a service for money and this is NOT a FREE service. Anybody who is genuine who is prepared to pay for work, please feel free to contact me.

Hi,

Just to say that I have bought and got a refund on lots of article spinners but the only one I use is rapidrewriter.com - they all have their faults but this one is the most user friendly I've come across and you get a very good marketing course thrown in.

NonTechie

Serial refunders! Don't ya just love them?

Re's
Rob Whisonant

BestSpinner & SubmitYourArticle.com seem to be two good ones... anyone else find any better, easy to use services?

The service I offer for spinning articles is to not just spin the articles but to check the articles as they are forming, checking for errors, changing the source file and re-spinning, and repeating this process many times; and also checking the way that a variation of a word / phrase relates to the words / phrases on either side of it. This is a very time consuming process but it does produce very good spun articles.

For the reasons above, the service I can offer is only available for a limited number of clients, so this would not be suitable for somebody who wants a very fast turnaround, is expecting a very cheap price, or who is not really concerned about the quality of the articles.

Please contact me by PM and include your email address so that I can reply to your email address if you are a serious buyer. Thanks.

Emeralds

I had sent this to another guy looking for a spinner and he didn't reply so I guess he found someone, but when we are in a bind and need to outsource some of our work, we have a woman that we use that does about a 24 hr turnaround depending on quantity and day of the week. She's usually great about letting us know if it will be longer too. This is what I sent the other guy:

I'm not comfortable posting other people's emails in public so I can certainly pass hers along or pass a message on to her to contact ya'll directly, but we've used her both for original article creation and spun article creation and she's been dependable for the past few months thus far.

Kwame, could you please PM me your Email address as I can't reply to your PM 'cos I don't have enough postings yet.

Thanks

if you are looking for a tool
magic article rewriter is best tool to use..
if you are looking for service or human power, you can pm me, at back end, we are giving this service to few of our amputated clients

If it took it 4-5 hours, don't expect some one will do it for $5 or less than $5 range. Spinnning word level is easy but sentence level take time. So outsourcers expect minimum $20 per article spin ready articles.

I'm seriously affected by not being able to PM people who try to contact me. I've searched in the forum rules to try and find out how many postings have to be made before we are allowed to PM somebody but I can't seem to find anything on this. Does anybody know how many postings are required before we are able to PM people?

If you are going to outsource this, why don't you just outsource someone to write you good unique articles?

Hi all,

Just wanted to say several of you had PM'd me over the summer about article spinning and I am just now getting them. I took some time off this summer while we moved from WV to OK. But I am back to work.

I do spin both at the sentence level and the word/phrase level. I use TBS. Just send me a PM if I can help.

Belinda Mooney

I submitted a project on freelancer.com for level 2 article spinning and got back around $20 for a 500 words ( output) article. This will give you an idea of what you expect from outsourcing it.

There's a site that will do sentence level spinning for about .15 per sentence. here is the url http://www.humanrewriter.com . I have not tried them out, but the guy how recommended them is an experience internet marketer so I am going to give them a try.

Hi, I just found someone here on this forum last week and tried them out backlinkdivas.com orders@ Anyways in just a few days, it's made a big difference in the amount of traffic my site is getting. Mention you found them here and get 50% off first order.
Suzanne

Omg, dont do this. It is much cheaper to just use spinning software, trust me I tried all the alternatives. However; almost all spinners are complete and utter crap.

The only good spinner is the best spinner

I suggest buying it, you can even try the trial.

Its $7 for the first week and $77 per year afterwards

Yes do approach spinning with caution.The only decent spinner is the best spinner. It is pretty easy to use, as long as your not an idiot. The reason it is so good is because it has a human generated thesaurus, not a computer generated one. The more people use it, the better the thesaurus and the spinner become. The developer actually pulled a cheap on this and it was a genius idea, all without him having to do much work. The best spinner is simply genius if used correctly.