Dana Forsythe

Hi Casey,

For some reason I'm not getting your emails. Can you PM me the updates? My sniper has stopped working today but hopefully its just because I need the update.

Thanks
Dana

takeaction24

Wow Mark you and Vetteran are smart gentlemen.

So do you think I should focus on one or two keywords per domain and once I get them at the top then go for others ?

Actually that maybe a good strategy.

Would do you think would happen the way it is now and the bandwidth is not an issue as I have unlimited.

If I stuck with what I have then what min and max would you say would be best to make it look realistic please ?

I pay £100.00 per month to Virgin Media for all my stuff so I am only using what I am paying for lol

Thanks

Nev

MisterE

Vip-ip,

On average each search consumes 3.75 MB on average. The same amount is used by a browser with 3 tabs open and very little activity other than normal send and receive packets every 10 minutes.

Mark

DanielItahov

Hi, Casey. Please respond to my email that I sent you like an hour ago.
This what heppened:
1)I deleted the SESniper from my computer, because it stopped working.
2)Saved my campaigns to notepad file.
3)Restarted the laptop and tried to download the program again from the zip file in the first email, hoping that it will help to fix the problem.
4)The link opens the sales page and not the zip file that was in the beginning.
5)I never got second email with upgrade to v1.3
6)Sent you an email and pmed you in SEO forum. My user name in SEO forum is ditahov.
Please let me know if you need more information. Should I use the same activation code when you send me a new link or I will get a new code as well?
Thanks, Daniel.

MisterE

This sounds much, much better to me. Slow and methodical while gradually increasing activity or adding in new KWs. As for Min and Max times I'm from the school of thought that says longer is better. Personally, unless I'm testing, I use 25 and 59 minutes.

Even though you have an unlimited bandwidth plan I think you might want to read the small print again just to make sure.

Slow and Easy,
Mark

reiki2

Hi

I have'nt received a link for the update

Thanks Malc

Jammy

Any chance of me getting access to this software today??

reiki2

Hi
Plus when I try to fire up the software I am now getting this error...

Access denied for user 'ministe_snipera'@'88-97-6-126.dsl.zen.co.uk' (using password: YES)

I rebooted and also used a proxy service with no success

First time I have had a problem

Thanks Malc

vetteran

I doubt that any ISP offers unlimited bandwidth.

There seems to be some confusion about bandwidth and line speed,
they are not the same, nor related.

More members need to read GoogleDominion.pdf! it's in SES directory.

mysubmission

Hi just paid through your paypal link and Got no download page "Paypal data no available" !!!
Paypal details:

Business Name:
Alpha (The recipient of this payment is Verified)
Email:
support[at]backlinknuke.com
Web Accept Payment Sent (Unique Transaction ID #57V493261J618940X)

I'll mail also support[at]backlinknuke.com to see what's the problem

Can you pls fix this and thx in advance

mysteryleaves

[I am getting the same problem as well hopefully he will fix it[/I]

ArtiGal

Hi Casey,

My partner and I purchased on Dec. 10th - just tried activating the new version and we're getting an activation error. Pasting in the activation code that came in the email on the date of purchase.

I can pm you proof of purchase if you'd like.

Thanks for your help,

Elise

Dani723

Is anyone else finding the new software much slower with the same settings and the same proxies used?

mysubmission

I didn't even got the soft, i just paid and got nothing !!! seems they have a problem with the online payment gateway (paypal)
i hope to get a response asap from the software owner as he seems to be online right now.
(mail already sent and no response until now)

Dani723

Ah, it seems that two Google country search engines had been added to my lists for some reason, so it might be worth checking your search engine lists briefly.

Russell Portwood

OK - I've read most of this thread and haven't seen this question. Forgive me if it's here.

I like to look at logs and/or Google Analytics to see stats about my traffic. Is there any way to determine what real visitor traffic is as opposed to traffic coming from the software? I suppose you could quit using the software for a few days to see what the difference is and then crank it back up but if there is a way to separate them it would be nice.
Any ideas?

Thanks!

mysubmission

Glad to see that this is workin for you

I still wait for the seller to read my mail and respond as i paid but didn't got my copy !!!

is there any other way to contact the owner?! i tried mail but no response until now and i can't PM here!

reiki2

(I doubt that any ISP offers unlimited bandwidth.)

Was this in answer to my error problem?? Access denied for user EDITED (using password: YES)


I check my usage and have only used 2.4% of my bandwith

Malc

MisterE

No it wasn't your answer. There is a server error on Casey's end. Be patient I'm certain Casey is working as fast as he can (maybe even faster)

PLEASE CHECK YOUR PRIVATE MESSAGES!!!!!

mysubmission

Hi, MisterE you seems to know "Casey"
How can i contact him (other than the suport mail)
I've tried but got n response :s
I've purchased few time ago SES through paypal but got no download and nothing !!!
and now seller is offline
any on can help here pls?
thx

vip-ip

Sounds like the update to 1.3 screwed up the delivery system after PayPal payment is made. I haven't used previous versions because I just bought it today and I'm eager to try it out.

A lotta folks are getting anxious, Casey. I can understand waiting a day for a $7 WSO by a newbie who's never ran one before, but for a $77 piece of software this is poor performance. I hope the first impression isn't going to last.

Best Regards,
vip-ip ...

linklover

still no email updated version of SES

vetteran

Hmm, there do seem to be gremlins in the ether though my ses
works fine and I can start another instance.

Shame for you new buyers but hang in there, all will be sorted.

mysubmission

Ok i'll try to wait and see if this will sorted out fast
but now website hxxp://sesniper.com/wso.html is showing 404 error (hope it's temprary) just check it yourself !!!

MisterE

Mysubmission,

The support email is the best way to get a hold of Casey.

I have no inside track to get through to him any faster than you do.

Please be patient, Casey is dealing with a massive move from one server to a VPS (virtual Private Server) Quite a lot can be involved and problems always arise unforeseen. I know Casey well enough to say with out a doubt that he is working as fast as humanly possible to get all of the Sniper users issues worked out.

You will not be forgotten or overlooked..... Just try to be patient.

Mark

Jammy

vetteran and MisterE, it's difficult when you've been waiting a couple of days already but thanks you guys for the reassurance

Tacobomb

Judging by his posts last night and early this morning he was up most of the night and is probably taking a much-needed nap.
I know from experience he responds quickly to problems posted here. I'm sure all will be corrected in time.

I do know that he needs to work on his email delivery. I thought I was an isolated case but it appears there are several other people not receiving emails as well.

Again, I'm sure in good time all will be corrected.

Jim

EdwardDennis

What am i missing here? The green bar is still NOT moving. PLEASE HELP!!

MisterE

All of us 'old timers' sincerely feel bad for you, obviously the timing could not have been worse for you. Once the move has been completed and all the bugs worked out you will be much further ahead then we were when we first started.

PLEASE!!!! Everybody be patient!

And for a little perspective.... Casey receives between 300 and 500 emails a day.... When everything is working right. Each additional mail he receives under these circumstances only delays the process further.

And, if it makes you feel any better.... I'm not up and running either..... PATIENCE IS A VIRTUE.

EdwardDennis

MisterE, do you by any chance know what's wrong with my sniper? I went to control panel to remove the old version of SES, installed the new version, open it without any trouble, but for some reason the green bar is not moving at all.

The campaign is still there, the proxies are still there, my settings are there, but I left the min and max stay blank.

MisterE

Edward, The Min and Max have to have values for sniper to run. Stop the program, fill in the minutes you want, then start again.

Good Luck!,
Mark

EdwardDennis

MisterE, you're man of the hour!!! Thank you very much!! It's running smoothly like a ferrari now!

Anyhow, what settings would you recommend on min and max stay?

MisterE

If your speaking about the new feature of 'visit time' I would guess 35 seconds to 79 seconds or something similar, mix the numbers up and stick around a bit.

If you were speaking about Min and Max for search times then I would use something similar to 25 Min to 59 Max.

If this didn't answer your question properly let me know and I'll get back to you ASAP.

Mark

EdwardDennis

Yeap, I was talking about the new feature. Those value are in minutes right? So basically I would put min 1 max 2 or 3?

Tacobomb

Mark, The visit times are in minutes not seconds, according to the instructions, right?
And would it matter about these times if using the GP mode? Could they stay blank?

MisterE

Hey thanks Jim & Ed for the great catch! In minutes try 1 and 3. Or start a timer, read 1/3 of the content on the page for a Min. MInutes, then time a full page read and adjust to the next minute increment.

HA HA now you all know that I wasn't kidding when I said I wasn't up and running either.

Sorry Jim didn't catch your last question. Yes, for GP it won't matter, you should be able to leave them blank. It's just searching not visiting.

Mark

DorianJ

The only the manual says is, "The hits DO SHOW UP in Awstats. It's in the *Not viewed Traffic section."

mysubmission

Now seems the website is running again, but still got no response or my purchased soft yet (hope this will come soon)
can't wait to test this software which seems to be great but support little bit slow (maybe due to the server transfer)

DorianJ

The manual says, "Stay time Min and Max boxes. These are in MINUTES."
Unfortunately it says nothing about what the purpose is for putting values in them. Mine are left blank. Perhaps someone here can explain why a value should be posted into them.

MisterE

Dorian, G'Analytics uses JAVA to record the stats for a page. In Sniper mode the visits will be timed by G'Analytics adding to the overall uniqueness of your site. By having this feature Google may possibly grade your site higher because the visitors are spending more time on it, not simply 'bouncing' onto another search result or website.

Did this answer your question?
Mark

DorianJ

Reduce your projects to just one domain and only a couple relevant keywords for that domain and choose just Google and Yahoo for the search engines. Loads some fresh L1 proxies, then QUIT the program.

Relaunch SES and check that your domain, keywords, search engines, proxies are still the same and if so, run it in GET POPULAR mode.

Report back if that helps or not.

EdwardDennis

This problem has been solved, thanks to MisterE. I thought it was okay to leave the min and max stay blank. Turned out that you have to put something on this section.

EdwardDennis

MisterE, I read on the email that casey sent out yesterday, he says if you don't have Google Analytics, min and max stay time wouldn't do any good, correct?

DanielItahov

I never got respond from Casey for my last post. Please, Casey read my post in the #2384
I sent you an email as well to support@...
Please, respond as soon as possible.:confused:
Thanks, Daniel Itahov

MisterE

That's the way I understood it also Ed.

I use AWStats, once Casey brings his server under full control I'll be running more tests for all of us. I'm most curious about what may show up in it since this last update. I have a feeling (albeit small (I'm thinking about something with the way AWStats operates now)) there may be new results.

Mark

DorianJ

I believe it did, but if you can reassure that the Min/Max value is not necessary in Get Popular mode, then you've done a fine job, good man.

caseyallen

@vip-ip , lol read the 40+ pages.. My service is top-notch! =) But I'm only human, and not God.

--------------

@mysubmission, I see it fine. I received your order, so you must see it. =)

--------------

@Jammy, If it's been a few days and none of my help can help you, just let me know and I'll get you a refund. =)

--------------

@EdwardDennis, What did you put in your site 'sit' time? It needs something in it.

FYI: Site sit time is in Minutes

--------------

To all customers. Please read the manual, FAQ, and ErrorsandSolutions file before emailing or asking for help. 9/10 questions will be answered in one of these 3 files.

I woke up to 900+ emails, got it down to 600, went to the store for an hour, and now have 1,000+ emails again.

I am only 1 PERSON. =) So this will take me 3-4 days to answer everyone. So be patient.

The best thing to do is ask in the support forum, it's up now.

Hope this helps.

MisterE

Dorian, if you mean MIN and MAX search time, then you still need to enter 2 separate values for the search times in either mode, Sniper or GP.

If you were speaking of visit times MIN and MAX and you were only running in Get Popular mode then no, you would not have to enter visit (stay) times.

Get Popular only searches it does not visit. Sniper mode searches then visits.

OK?
Mark

mysubmission

Hi Casey,
Glad to see that you got my order but i didn't got my soft
I understand that you're extremely busy and appreciate your care
But just one question, when should i get details and download link for my purchased soft ?
I need to test asap on a customer website (hope you understand it's URGENT)
and again i understand and appreciate the hard work you provide here.
Just mail details (if possible) to my Paypal email

Supafly

I cannot access SES! Has anyone had this problem...

I simply click on the icon and I get an error message:

'minisite_sinper'@'99-19-239-206.lightspeed.sndgca.sbcglobal.net'(using password:YES)

It was working fine yesterday and for a little while this morning. I'm running Windows XP and have gone through all the steps in the Errors and Solutions file, have uninstalled the program and reinstalled both SES and EPS (just to cover all bases), have removed all user passwords, am running as Administrator and have insured my firewall is not blocking the program. And still, I get the same message. It appears a port may be blocking SES, but everything else on my computer is working fine.

This is a real bummer. Was told someone else earlier may have had the same issue, but I cannot find the post.

Please help if you can!

Regards,
Dino