Pedro Ferreira

Pretty much what's happening to me and yes I'm running the software from Portugal, you assumed right...

My internet connection is fast, and the program doesn't seem to be that resource intensive...

I'm running just 1 search per loop and it takes me more than 1 hour to complete one loop with min 2 and max 4 (sniper mode).

All the settings are as they should be, recommended by Casey...

I clean the proxies with Elite Proxy Switcher.

Could it be a problem with Internet Explorer? It seems like the software runs through it, or am I wrong?

Nic Oliver

There are several things that puzzle me about using proxies, as I know very little about them.

My understanding of Level 1 proxies is that they are High Anonymous.

If so, why do we need to put in a long list of Level 1s? Wouldn't 10 at a time be enough, testing and changing them every hour or so? And would entering a shorter list into SESniper make things go faster?

Nic

Clickbankreviewer

Hello Casey. I have a question about keywords. I learn somwhere that when you search for keywords, you should look for keywords in your niche with a global search of more than 3000 but a competition " " in google with less than 35000. For example, how do you suggest we use the google keyword tool. If I go to google keyword tool, should I type my domain name on the right where it says: website and then hit search, and then choose every single keyword that comes up for that result. Or should I be looking for long tail keywords that have more than 3000 global searches, and then you go to google.com and type that keywords in quotation marks " " and see if it has less than 35,000 competition pages? Just something curious on how this software works. Thank you for any wisdom you can shine on me.

Thank you Casey

parsibagan

I cannot say about the software in its entirety because there are certain health constraints that prohibit me from trying it out as of now. However, as far as support is concerned, Casey shines out like a guiding star in the darkness. I was unable to initiate the program with the supplied parameters, told Casey about it, and the problem was resolved in a short time. Thanks again Casey and God Bless.

Clickbankreviewer

Ok I just finish adding my domain name and my keywords on the software. What do I do next? I am reading the pdf instructions but then it says settings tab. I am afraid to hit settings tab because I don't know if that is what I am suppose to do next. I see get popular, sniper mode, stop, load project, quit, what button do i press after loading my domain name and keywords?

Clickbankreviewer

Oh yeah also on that same screen, it says : random visit time min 10 max 20
min stay time 10 max 20

Do I have to mess with that or just leave it alone?

I am asking this questions as the pdf instruction book does not mention anything about that..

Thank for your help

vetteran

Google stores the IPs for 9 months so the more proxies you have the better
as a keyword is less likely to use the same proxy again on another search.

vetteran

Clickbankreviewer

Stay time is for Sniper Mode only.

Settings tab is where you set the Timeout figures, the number of threads and load the proxies.



See the Google Dominion.pdf

payday911

interesting...

Clickbankreviewer

Veteran thank you for your reply. But what button do i hit after i enter my domain name and keywords. Do I hit the load project button, the sniper button, get popular button or the settings tab button? Do I live the 10 and 20 number alone or do I change that? This is my first time using this software. I am reading the pdf book but it doesn't say exactly what to do after loading your domain name and keywords, page 5. Let me know thanks...

vetteran

Pedro Ferreira

How many Search Engines are you using?
What Stay times?
One keyword?

When you've tested the proxies use those up to about 700ms.

vetteran

Clickbankreviewer

You've already loaded a campaign when you get to the stage
of entering domain and keywords.
Use the GP mode.
Leave Stay time blank.
The Max time will depend upon what rate of search you want for your
keywords. The Thread number increase the rate.
Like single lane highway vs multiple lanes.

Clickbankreviewer

So what you are saying should look like this:

Random Visit time: Min 10 Max 20 Min Stay Time blank Max 20

Then hit Get Popular and when it finishes go to the settings tab?

Am I correct here? Sorry that I am being so specific, I just trying understand the exact process.

Pedro Ferreira

I'm using 1 url + 1 keyword + 1 search engine = 1 search per loop

Min: 2
Max: 4
Min stay: 1
Max stay: 2

Thread num:1
Timeout (send): 15
Timeout (Recv): 15

With those settings it's taking more than an hour to complete 1 loop.

I will do that proxy thing you said and see if it works.

Thanks.

Clickbankreviewer

I have one domain name i enter and 51 keywords, if i am using the sniper formula, i typed 51 under keywords, I don't know what to put under number of search engines, also I am confused about what should I use. I see Se SNIPER and if I scroll to the right I see Keyword Data. So once I have the correct keywords enter and the correct number of search engine, which one should I use, the settings under SE Sniper or the settings under Keyword Data. Also I enter my domain name and keywords and fill out the min and max settings, am I suppose to put a check on the left next to random visit time or am I suppose to leave that blank? Sorry I have so many questions but if you can help me out I would greatly appreciated...

Thank you guys!:p

freddo

I'd just like to echo that. Tune-Up Utilities is a great little ute app and it gets better with every release... I've been using it since the 2008 version. Well worth the sheckles!

Clickbankreviewer

Thank you but I am broke. I have 0 dollars in my bank account. I bought this with my bank account and now it says -$97 dollars plus an additional $34 for non sufficient funds so tomorrow my bank account is going to say -$131 dollars. I am going to ask Casey for help as he email me back promply and didn't charge me for anything. Plus is his product so why not ask him for free. Thanks anyways. I will wait for him or wait to see if anyone else in the forum will answer my questions.

takeaction24

Why would you have 51 keywords ?

Why not scale them down a little because that is rather a lot.

Just my opinion

All The Best

Nev

mysteron

Very useful, thank you

vetteran

Clickbankreviewer

Did I mention reading the GoogleDominion.pdf?

Nev is right! That's at least 46 too many.

Clickbankreviewer

I have one domain name i enter and 51 keywords, if i am using the sniper formula, i typed 51 under keywords, I don't know what to put under number of search engines, also I am confused about what should I use. I see Se SNIPER and if I scroll to the right I see Keyword Data. So once I have the correct keywords enter and the correct number of search engine, which one should I use, the settings under SE Sniper or the settings under Keyword Data. Also I enter my domain name and keywords and fill out the min and max settings, am I suppose to put a check on the left next to random visit time or am I suppose to leave that blank? Sorry I have so many questions but if you can help me out I would greatly appreciated...


Ok nobody has still answer my question. What would be the proper settings to use. the left side under se sniper or the right side under keyword data. Also am I suppose to have the little box check or uncheck next to random visit time?

mysteron

About 2 days ago and approx 4 pages ago on this thread I was quite abrupt because my software wasn't working...which Casey successfully sorted out for me..I said to him (without being asked) that I would leave a 'review' after trialing it...

ok, so a small .com domain, in popular niche (property), primarily UK based. Owned 6 months, two pages of content...doesn't get many monthy searches, in fact 400 or so only. 1.75 million competing pages. Up until yesterday it had no ranking in Google, Yahoo, Bing or importantly Google UK...I'd done nothing with it

Yesterday morning I submitted several hundred backlinks via an automated website I own...and started SE Sniper yesterday too.... 3 key word's, 4 search engines, and time periods set to do ONLY 2 searches on each keyword a day in Get Popular mode...yepp conservative I know, but wanted to understand it before going gung ho on some of my other domains.

Time to do all that, 20 mins maybe. Not Including the testing of proxies...which ran in the background, before starting

Today.....

Google : Main Keyword - Rank 8,11,12....for the Home Page, Post 1, Post 2 respectively.
Yahoo : Main Keyword - Rank 22
Bing : Main Keyword - Rank 23
Google UK : Main Keyword - Rank 23

Others will be better than me at judging if the links worked, SE Sniper worked or a combination of both....will be interested to see if the placings hold up, improve....etc.

And a question to all.......if I stopped promoting, presumably over time my rank would slowly deteriorate?

vetteran

mysteron

Good news!

Keep SES ticking and hopefully when your site is on page one
real visitors (buyers!) will keep it there.

As you said, it's not a lot of trouble to use SES.

Dani723

I have also found that with the same settings and same proxy sources, version 1.3 was running much slower. Now I'm filtering out the proxies for those with delay less than 1000ms in EPS and I've noticed a big improvement, so try this out.

Also, if you're not getting many successful level 1 and 2 proxies from EPS go into test > settings and up the timeout to about 20 seconds. I've tried it with more than 20 seconds this and it doesn't seem worth the time for the few extras that I got.

The proxies from Forum Proxy Leacher are all free and seem to run faster than the daily proxy list, as do the ones at Eliteproxies, so check out these other free sources and be sure to still filter by delay.

But I'd really rather form a co-op with some people if we can get a reliable source featuring a long list of 1000ms or less level 1 or 2 proxies

takeaction24

First Scale down your keywords to say 5

Only use Sniper if you are already listed on page 5 or above of the search engines you select. If not you need to use Get popular for a while first.

Random Visits must be checked.

How many search engines you want to use is up to you.

I would stick to the most popular ones right now like google,bing,yahoo and google uk.

First thing you need to do is pick your 5 best keywords, decide how many search engines and then decide how many threads based on your connection and bandwidth allowance.

I will try and help you as much as I can but it took me a lot of learning all this stuff to by reading the forum and reading all the material Casey sent with the software.

Start with the right side that says keyword data and lets say for example 2000 searches per month then your number of keywords, number of threads and lastly your number of search engines and that will fill the min and max times in for you.

Once you have done that you can then put the min max times in the left side and it will tell you how many loops.

All The Best

Nev

reddevil1

@vet

sorry to be a pain any suggestions with my install problems
thaks red

Dani723

Nev has 6 people interested in this far. The EPS proxies he's interested in offer roughly 500 working lvl1 and 400 lvl 2 a day.

He's emailed me to say that the average working lvl 1s are 700-1000ms. If this is true, then come on, join us and save some serious time here!

Martydee

I'm in the U.S. Sunny California.

Clickbankreviewer

TakeAction 24

Thank you so much for your input and obviously you are more advance than me since I just bought it yesterday. I read the entire 9 page pdf ebook and I was also messing around with the sniper formula. It seems that when I type the number of keywords under Se Sniper the min and max time didn't change and neither did the min stay time and max stay time. I try putting different numbers of keywords in there to test it out to see if it would suggest different times but it doesn't do anything. The only thing I notice that it changes is the average loops per hour and average loops per day. So what is the purpose of sniper formula? I thought that that was going to be my guide for putting the right min and max time under the Basic tab section. I don't get it, lol.

Ok so anyways here are my settings, let me know what you think?

I put one domain name and I have it highlighted, I enter 28 long tail keywords to the right

In the bottom I have random visit time checked,
Min 11 Max 13 Min Stay Time 8 Max 10, then I hit the get popular button and now is doing some type of search which is taking forever, let me know what you think so far, also when it finishes doing its search, what is going to happen? Am I going to get a message or do I just go on to the next tab, which is the settings tab?

Please help a rookie out

Thanks man!

Martydee

I'm interested. How much would it cost?

takeaction24

Hi Red,

This may help you my friend

AppDomain.UnhandledException Event (System)

It explains what an unhandledexeption is

Also did you download Net Framework 4 because this is a must if you don't download that first you have no hope.

All The Best

Nev

Mezzers

Just purchased this software and looking forward to trying it out!

takeaction24

Hi Martydee,

I have 6 people right now and trying to get 10 which would bring it down to 6 bucks per month.

Fingers crossed we get 10 lol

If you are interested then please email me with Proxies in the subject to nevillebonusreviews@googlemail.com

All The Best

Nev

Dani723

See my post above where I quote him, it also shows his email so you can let him know.

I'm going through three different sources and combining them at the moment to get enough working fast ones, and even then, only coming out with about 60-70, which isn't going to last me long, so please, please, can other people get on this now and save us all some time!

jxuereb

Okay. This proves that my theory never made sense in the first place (:

takeaction24

Your Welcome,

Do you have your proxies loaded and ready to go ?

You may also need a patch if you are only getting very low amounts of L1 and L2 proxies. By low I mean less than 100 because that happened to me and it took me days to work it out lol.

If the software is running correctly you will see a green bar slowly moving at the bottom. If it is not moving then you will have to reload your project. It will say working on domain xxx and keyword xxx

All The Best

Nev

Clickbankreviewer

No I do not have any proxies loaded as I haven't got to that stage yet. How do I do that? Also can you please answer my last post.. I want to understand it before I got the the settings tab and do the proxies thing.

takeaction24

Yes you are good so far.

The min max stay times are for Sniper mode so just put 0 in both of those for now.

Skip the settings Tab and go on to Search Engines and tick the ones you want.

At this point you should not be running the software because you do not have it all set up and configured.

After you have done the serach engines part then go back to settings and read the the text file that says proxies please read. It explains you need to download some software and how to get the proxies.

All The Best

Nev

ThisIsMyHealth

Check out this post

http://www.warriorforum.com/warrior-...ml#post3054273

and download the example excel sheet. It will clear a lot of things of up for you. The left side doen't give you min/max times, only the right side does that.

Clickbankreviewer

Oh ok so since I am using get popular then just leave min at 11 and max at 13 and on the other side min stay time and max stay time put 0, right?
sorry I am kinda of slow, ha ha

ThisIsMyHealth

Nev,

Thanks for helping out!

takeaction24

Hi Dani,

I don't know what the speeds are my friend what I said is that we will get between 700 and 1000 Level 1 and Level 2 combined and saves us searching for them all over the net.


All The Best

Nev

takeaction24

Your Welcome,

I probably suck at the min & max times and trying to work them out to perfection but I have had mine up and running for a week now and have hit all the obstacles so I am happy to pass on what I have learned from Casey, in here and from extensive research.

All The Best

Nev

takeaction24

No Worries my friend.

If you put your mouse over the buttons get popular and sniper a bubble appears explaining what each one does.

The get popular does not click on your link so no need for min,max stay.

The sniper mode actually clicks on your link so you need to specify how long you want it to stay on your site.

Hope this helps dinner time now will be back later

All The Best

Nev

Clickbankreviewer

does anyone in here have skype and can walk me through the program? sometimes in the forums it takes along time to understand something but I notice that when you talk to someone you understand better. So if anyone in here can help me answer some of my questions through skype please let me know and I will give you my skype id. Thanks...

Clickbankreviewer

ok go eat, i'm gonna eat too, did you say dinner time? lol wow is too early for dinner i'll be back in 1 hour, kinda of hungry myself

vetteran

reddevil1

SES will run fine on XP, no bother with UAC.
Default log-on is Admin mode so that is how programs will run..
Do you have the second issue of v1.3?
Have you tried to install SES on another computer?
If so then you will another code from Casey.
Is .NET 4 installed?
Get and use Tune-up Utilities 2011 to make sure that your pc is running
at its best.

mupar

Not too quick, as i mentioned in post #2672 (page 54) you must read their TOS, it is still possible if Casey is upfront with this company and wants to strike a deal.

sfrias

Hi Perdo, I initially had the same problem. What was happening is that I had switched IP adresses using EPS while testing proxies. For some reason, IE didn't akknowlwdge when I reverted back to my real IP adress. It still kept using the proxy adress I temporarily used to thest the proxies on EPS. It seems SES uses IE, so what was happening is IE was using a slow proxy adress to run the SES requests. Just check what IP your IE thinks it is. If it is not your real IP, that is your problem. I couldn't get IE to respond correctly. I had to hit the "revert back to install defaults" to get it to react correctly.
Anyway, hope this helps.

Pedro Ferreira

It seems like I solved my problem, it was the proxies.

I was using only good proxies but some were very slow so I filtered them and now I use only those up to 700ms as someone recommended.

It's running much faster now. I'm running 6 loops per hour which is fine for my needs.

The software is still running slow compared to what it should be running in optimal conditions but that's ok. At least I'm getting somewhere...