vetteran

Clearly stated in Your_Proxies_READ.txt

DO NOT give anyone else these proxy urls. If you are found to be sharing the proxies, your license will be deactivated. This means Do Not post these on any forums, etc.

Clickbankreviewer

Websteve please remove your post immediately. Didn't you read what it said in the bottom???

DO NOT give anyone else these proxy urls. If you are found to be sharing the proxies, your license will be deactivated. This means Do Not post these on any forums, etc. You are going to get us ALL banned Read...Read...Read...!

ednigot

Websteve,

just delete your post, please. You shouldn't post that here openly. Send that info by PM or let Casey answer it privatelly

Ed

swpower

Is this really wise? I mean how much you can SE Snipe your site(s) is dependent on the search volume there are on the keywords!? With 20 loops you can still abuse the search engines depending on the existing number of searches per month, or?
If the number of loops were related to the number of searches per month, then it would perhaps be a good idea.

If ppl just use L1 and L2 proxies and a "reasonable" number of searches per day in relation to how many searches that are done per month, then there should be no problem.

I *only* use G. They have so many searches for just about anything so this kind of tool should not even be noticed. With Metacrawler etc it should be another story...

swpower

So, now we have a guy who just lost access to his service, that websteve guy. How many times do Case need to say this?

I have lost faith in mankind.

Joseph Then

Casey, please deactivate websteve's account and ban him from buying. Anyone with normal working brains will know that it's dumb to post the URL in a PUBLIC forum.

Clickbankreviewer

Hey wuz up yall
Just wondering. How many people are using here L1 only and how many ms are you using. I notice if I use only L1 from 100ms to 600ms the software works fast and you get more loops. I am using 5 threads, one search engine and 5 keywords. Casey what would you recommend to be a very safe loop per day or per hour? Also with my settings above what would you recommend my min and max time to be. I've been just been putting sometimes 10 and 20 or sometimes I change it to 4 and 5. I notice some people put 15 and 15 for timeout send and timeout received. I put it at 5, 20, 20. I notice that anything above L1 700ms the software slows down significantly. Just your advice on this would be great so we can all achieve better results. I also notice that on Y and B is easier to rank, I am already on page 1 in one of my domains in Y and B, but to tell you the truth I never really did check it until today so maybe it was at number 1 before I used this software, who knows. G is harder to rank on, for sure...

dake

Isn't using proxies forbidden by google. I won't go for it, as it seems to be a black hat method, too risky.

ednigot

I am PMing Websteve but looks like he is not in the forum now.

Most likely the proxies will be useless tomorrow. Hopefully Casey will change the link and email us a new one.

Ed

websteve

Dont know what i was thinking, i usually have more sense

Please accept my sincere apologees

What a plonker i am

Dont know what i was thinking

Clickbankreviewer

Who cares if is Black hat. I don't care if is yellowhat,greyhat,pinkhat,bluehat, the only thing that matters is to get your site to page 1 and get alot of traffic. You can do it the old fashion way, but you are going to have to write lots of articles, hundreds or maybe thousands of backlinks to your site, create blogs, etc..There is aloooot of work involve in seo especially to rank well in the organic results. So is up to you, you can take it and walk across the bridge or you can walk all the way around to get to the other side. Either way works, why work harder when you can work smarter. If it wasn't for this computer software programmers, where would we be? I am just thankful that someone is making life a bit easier for us.

vetteran

When you use L1 proxies the destination cannot tell that any enquiry is from a proxy.

If you use L2 proxies, the destination can tell that the enquiry is from a proxy.

Whether Google does is not clear.

As Casey lives in CST, he's either up mighty early or late.

Magic32

This is write even in Googles Webmasters Central.
But in other way Matt Cutts talking about "bad neighborhoods", etc.
And this is not problem now to make for your site bad neighborhoods and other not good thing.
So, i think the problems with high ranking can be.

Chris Baxter

I have a better suggestion.

As this app checks for a valid license every day, why don't we let it upload the logfile of activity at the same time?

This accomplishes two things:

1. Any sp@mmers can have their license revoked (perhaps for a couple of days in the first instance, escalating to full revocation for continual offenders)
2. If there are any complaints from search engines, the culprits can be easily identified and revoked.

If you try to cap max loops, some idiots will just run multiple copies at the same time to get around this.

HTH

Magic32

Casey
The problem is that software out in public in large numbers. People in the past used this method even manually, but you made it to the Public i.e. sooner or later, this method stop working.
You had to make a limited numbers of copies. Only 100 or 200 for example with higher price. Either raise the price to $200...$300 may be even $500.(Good reviews, even in this topic will be enough to ensure that people continued to buy this software even in high price ).
You need to reduce the number of newbies who are killing your software. Stop chasing the money or you'll kill your software and this trick with search engines.

I understand, this is dilema for you:
1. sold as many as you can today and forget about it tomorrow because a Search Engines make a changes.
2. Limit the numbers of copies, or make a really high price or even make it more private, etc.
In the 1st - you thinking only about yourself, about money.
In 2nd - you think about your customers.
You choose.


p.s. Any working scheme or idea is die when go in public. Especially in large quantities.

UniqueMind

Hi,

I'm interested. Would like to know if this also works for:

"example.com/nichepage"

or just

"example.com"

Please let me know ASAP. I have a site that targets many niches, so promoting just the domain name for various niche keywords doesn't make sense IMHO, or does it?

Best,

SR

thesecret

Last two days proxies from OP are almost all dead...I got only 20 L1&L2...

klever1

I think there is also an issue here with education.

A hands up from me .....

I am guilty of not knowing what I was doing on day one of using this software. I loaded the entire proxy listing sent out and started the software. Fortunately I only managed 2 loops at the end of this first day, however I would have undoubtedly used L1,L2 & L3 proxies.

It was not until day 2 that I questioned why there was an apparent issue with the speed of the setup and tried to look for answers as to why I thought it appeared to be running slow.

As a result I read more on this massive thread about proxies and what they actually do - others may not have done this and just used the software out of the box armed with the supplied documentation.

Then I realised that I should be using a proxy tool like elite proxy switcher to weed out what proxies I should be using. Since then and with a better understanding I am running more loops but no more than about 10 per day (mainly due to my band width).

So if you're a newbie like me, but not as inquisitive and / or looking for a quick fix (not understanding the repercussions of unknowingly abusing the software) to your ranking problems you may not have looked into the whole proxy thing, and will probably still just copy and paste the entire proxy listing day in day out.

I have just looked through the pdf sent with SeSniper, there is no proper education about how to use this software with proxies and assumes a certain level of knowledge, so you could say there is a need to address this within the documentation. I'm not putting blame to Casey - far from it, however if you want the software to be used properly (to a degree) you need to educate people. Then of course you have the greed aspect - you will always get people who want to abuse the software regardless of any instructions.

I recommend two improvements here to move forward.

1) More information about proxies and how to use them within the documentation

2) A cap / daily limit

3) Limit the amount of licenses, however I can see how this would destroy Casey's revenue stream.

Just being honest / offering constructive criticism.

vetteran

The instructions seem ok to me.

An extract
Proxies
Get fresh proxies 1-2 times a day. Some proxies 'die' throughout the day, so fire up EPS 1-2
times daily, load in the proxies, and test them. You can test the same list throughout the day, to
weed out the non-working proxies.
I recommend only saving Level 1 proxies. If you need more, then you can save Level 2 as well.
But I don't recommend Level 3 proxies.

Fair enough, perhaps putting Elite Proxy Switcher (EPS) would be better
but few of us are perfect.

tnimz

Yes, you can (and should) target specific webpages. Any URL will work.

klever1

Unless you have a proxy tool though there may be the assumption that the supplied proxy listing is fit for purpose, without any intervention required.

I think there has to be an element of misunderstanding otherwise people would not be using L3's and thus would not be contacted ?

Unless of course the search engine owners are directing them at the domain owner purely due to the amount of 'flooding' that particular domain is getting.

Either way I think if the smaller players (search engines) are latching onto it it won't belong before the big boys work this out as well.

Could be problems ahead....

klever1

Anyone else notice anything different today ?

I have been using awstat to show hits / visits / bandwidth etc over the past few days inline with using Sniper.

Awstats was showing an increase in activity alongside the use of Sniper.

Funny thing today - and just when I thought I had the software configured for optimum use, I notice despite the fact I have run 8 loops on 2 domains, awstats does not appear to register hardly any activity, certainly not inline with similar loops run on the previous 2 days...

Am I running the correct tools to monitor Sniper ?

linklover

I've been running for over a week. 10 instances open. for the week i was running too many threads, using all the engines. I am now using 1 thread and 3 engines with varying times on all instances.

I see virtually no effect on my SERPS.
some go up only to fall. some fall only to rise.
The ones i use on get discovered, haven't been discovered.
I keep plugging away cause I have faith in the concept.
I have seen a 50% intermittent rise in GWT's visit graph (looks like mountains and valleys)

Casey - why not filter all the L3's out of the list before posting?

vetteran

linklover

You cannot be serious? You are given a list daily and you are complaining?
You only have to make a few clicks and the pc does all the work.
If you paid for a list, you would still have to test and sort it.

Don't be so impatient, let SES tick away gently and you'll see results.

tnimz

@vetteran

I suspect linklover was trying to say that if the L3 proxies were removed, then that would decrease the chances for problems with abusing the system (less of a footprint).

Unfortunately, that still wouldn't prevent abusers from running a ridiculous number of loops every day.

h_al

Has anyone used for a site which is not listed for a specific keyword?

linklover

I am using 68 private proxies on top of an overall private proxy for my computers internet connection. If i leave one url and one keyword and 5 threads going, the bar flies.
I see a huge difference in GWT site visit stats.
But not the kind of SERP movement I thought I would be seeing. for either mode.

tnimz

How competitive are your keywords?

For highly competitive words with lots of traffic, if all your competitors have optimized their sites well, have tons of quality links, and are already getting tons of traffic from Google... then a bunch of "clicks" from SES may not be enough to break through (at least on its own).

UniqueMind

@tnimz - Thank you.

I'm in. Will let you guys know how this works out, cant wait to get started :]

Best,

SR

linklover

several kw have very low searches - in the hundreds, some have low thousands, some 1500 - 15,000, and some 6 figures. I use SES accordingly, hence so many instances.

Those kw's i am on page 15 or higher get sniper mode. all others Get Found.
The urls have anywhere from 100 backlinks to over 2000 according to SEscout but over 4000 according to google. domain is p4 over 11 years old. sub pages are pr3, just as old.

and also optimized the site as best as Website Auditor could help me with.

also dfb, blg, im, amr, sb, and a bunch of indi services over the past 2 months.

I fully understand the patience aspect of it all, have read this thread since its beginnings... (i think i came on within a week of launch) and have read almost every thread on here over the past 2 months. Also been reading WF, BHF and every link i can find about SEO, wh, gh, bh and bh.

tnimz

@linklover

Well, you certainly seem to be covering a lot of the SEO bases... I can imagine that's got to be frustrating, doing all of this and yet still not seeing tangible results. :-(

vetteran

Do those proxies change numbers daily?

h_al

Will "Get Popular" mode help in listing a site for a specific keyword?

Clickbankreviewer

So I know this question has been answer already, but how does the software rank a site with an extension after it, example.com/dog I thought it only work with the domain.com and nothing after it.

Another question I have and I know is probably been answer, I just don't want to go through 64 pages of post to find it, lol, ok so what is a thread? ON the second tab under settings to the right you are suppose to put the number of threads..What is it and how do you determine how many threads you put in there. I heard it affects the speed of your loop just like putting the right proxies does.

How many loops per domain name and per keyword is recommendable that we all stick to?

If one loop= one domain search and one keyword search, and then you have 50 level 1 in your proxies, does that mean that there were 50 searches completed for that keyword in one loop? Confused about that :confused:

Thank you for your answer guys

linklover

It is very frustrating but i have patience of a saint ;-)

The overall proxy changes every 30 minutes.

The 68 proxies change every few months. They do not allow SB :-(
good news is the L1 & L2 proxies from 1/12 are still working like a charm with metapinger. I couldn't download 1/13 proxies though - has the link changed?

vetteran

Threads are rather like motor lanes, more threads = more lanes = faster traffic.

There is no set number of searches per keyword!!

Use Google's Keyword Tool to see what is going now and set your search rate to increase that a bit, 5% or so.

Each search will be made, or attempted to be made, from the next proxy in the list, so a lot of searches will need a lot of proxies.

One loop will be whatever you have in that project. So if that has one domain, one search engine and one keyword then it's one search per loop.
But if it's one domain, 3 search engines, 3 keywords then one loop is 9 searches. That would use 9 proxies so it's likely that, when the list is completed, a keyword would use a different proxy.

vetteran

linklover

The proxy list address is still good, just tried it- no problem.
Can email you list of good L1 if you are stuck.

Clickbankreviewer

Veteran thanks for your answers but I am still confused, maybe is because I haven't had breakfast yet, lol.

Ok so listen, you said if I have 1 domain, i search engine and 1 kw that = 1 loop and only one search per domain/per kw and per search engine
But if you have 50 proxies and the proxies are simulating virtual people looking for that keyword, wouldn't that mean logically that in that 1 loop there were 50 searches per keyword with that 1 loop? Do you see what I am trying to ask. Maybe I am not making sense, I apologize, help a dummy out :p

tnimz

Someone else correct me if I'm wrong, but this could be your problem. If these are the primary proxies you're using, then you could be running SESniper many hundreds of times over the course of the month... but to the search engines, it only looks like 68 people have been searching/clicking to your site (over and over again).

The REAL reason for using proxies, is to create the appearance that hundreds, even thousands of people are clicking to your site -- and not just the same 68 "people" coming back to your site again and again.

Tom

linklover

nah but thanks - i got them.

Weird thing about one of the instances...
While one instance has completed 2 loops
another has barely moved. The one that barely moves has very short cycle times vs the one with 2 loops completed.

linklover

Is this so????
however GWT site visits shows a tremendous increase in visits.

vetteran

Better get some food!
Fish is alleged to be good for brains.

One search uses one proxy, capisce?

So if one loop = one search = one proxy.

If one loop = 9 searches = nine proxies.

Easy.

I might have mentioned it before but Google
stores IPs for 9 months so changes of IP are needed.

So, what you need is a way of using Google
without the IP being stored, yeah?

As it happens . . .

reiki2

Hi
V 1.3 seems to be working for me, appart from it doe'nt show the loops!! Any suggestions

Malc

vetteran

Hi Malc,

Something you've missed!

Go through the user guide again to spot what that is.

tnimz

I have given my copy of SESniper to my VA, with instructions to get new proxies every day and weed out the bad proxies 3 times per day.

Any suggestions about what kind of daily report(s) I should ask for, to make sure:
- whether the software is working properly?
- whether the software isn't being abused?
- anything else that's important?

Thanks,
Tom

freddo

To those nashing your teeth over proxies that drop off, etc... search this thread for the offer by takeaction24. Nev will share a good selection of L1 and L2 proxies with you for a measly $5 a month. I've been using his list with Caseys list for a couple days and it's well worth it!

linklover

So this Proxy question - is it unwise to keep the same proxies, even though they work great, for more than a day or so?

Is it true that all the site clicks will look like the same 68 people?

Clickbankreviewer

Anyone interested in the proxy list send me an email at makemoneyin2011@aol.com

I will discuss to you how to send me a payment through paypal and get your list.

Thanks!

h_al

Is there's a difference if you write the domain as http://website.com or website.com?

bmonster

Casey,

I need you to resend the link for v1.3 update from 1-7-11. I tried to download the link today, but a was sent to your product page.

Thanks,

beardvd@aol.com