Clickbankreviewer

LOL OMG what is going on here? ha ha ha

This has become a debate forum. Ok lets concentrate on using the Sesniper. I used the list from this morning and it still working perfectly for me. I'm getting about 20 loops per day. Not bad I think. Slowly but surely will climb to the top. I haven't seen any changes yet in alexa.com but maybe it takes a bit longer. I am using very good keywords that I chosed carefully that had very high searches and super low competition so hopefully that will help me rank faster. The only thing I always get confused on is the min and max time and the thread time. I heard so many different settings from different people so I am just using the settings that Casey recommends us in his instruction ebook. Casey what do you recommend for me. I have one domain, 3 keywords, one search engine, min and max i have it at 10/20 5 threads timeout send 20 timeout received 20 what do you think? Should I make any changes? I've been using this settings since I bought it 4 days back. Correct me now if I have something wrong. You're the man Casey!


Thank You,

:p

High Impact

Any plans to add a mixed query function in future releases Casey so that the program can run randomized queries of both modes in a mish mash mix? This would probably make the queries harder to identify and make them more natural looking.

vetteran

High Impact

Is that figure the monthly search?
Send an e-mail to Casey from the laptop for activating on that machine.

Is the search rate shown in the Keyword Tool similar for each of your keywords?

If not then run separate instances of SES. See whether entering data separately for
each keyword makes more sense. Or do it manually, not difficult!

Stay Time is only for Sniper Mode.

Leave SES ticking away all the time. When your sites are in the top 5/6 pages
change to Sniper Mode. Let SES tick away until they're on page one, by then real
clicks will keep you there. (Hopefully.)

vetteran

Clickbankreviewer

Threads is not a time but "electronic highways."

Make that 1 thread so you'll get about 3 searches per hour.

Casey has or is planning to cap search rates because some have abused the system.

Do each of your keywords get about the same amount of searches showing the Keyword Tool?

vetteran

I doubt it as it's highly unlikely that any "real" search would click on any site well down the list.

That's why Sniper Mode is recommended only for sites in the top 10,
better still , top 5.

High Impact

Hi Vetteran,

Keyword traffic is as follows (monthly):
2200
2200
368000
135000
245000

Current Google ranks as follows:

2200 position 3
2200 position 4
368000 position 6
135000 position 21
245000 position 15

I started using sniper mode from the start, although I have run get popular for a few loops (just out of curiosity really), I must have done about 70 loops already, possibly more because I closed the software and restarted my pc. I was getting a fair old speed last night as I bought the 2000 proxies a day list from my-proxy com.

So as my rankings are all top thirty, its safe to just run constantly?
I have settings min 1 max 3 visit time and 1 - 5 stay time.

High Impact

Thats true, but it might make sniper mode harder to detect.

Clickbankreviewer

nevermind is working now :O)

vetteran

High Impact

Are those monthly figures? and when you say position number is that a page number?

Assuming page number then SM for the first three and GP for the others.
Group first two as one campaign and the others as three separate campaigns and run
4 instances of SES. Set rates for about 5% of those searches.

vetteran

chowyoungfat

That's website access fault code.
So, you have working copy of SES?
You cannot put it on another pc without a code as it's machine specific.
There is no fault in SES - this not to say that improvements cannot be made - so it is something that you are not doing right or perhaps a fault in your pc. Get a free copy of Tune-up Utilities 2011 and let that check everything.

The proxies to select are L1 only and < about 700 ms.

thesecret

Ok, does anyone else has "problem" with Casey's proxy's, for the last 3-4 days I get like 30ish working L1&L2 proxies, I think there are too many members in and proxies die fast.
I am searching inurl:proxy.txt etc. in Google and no quality there....

vetteran

No problems ever, loads of L1 proxies < about 700 ms.

Magic32

Hi. Need advice.
I saw this question early, but didn't saw the answer:
Do you using SES in night time?
This is not natural for search engines when searches or clicks сontinued throughout the entire day in the same amount, and especially at night.
Primarily interested in the opinions of people who have achieved success using SES. Maybe you reduce numbers of searches and clicks in night time or you not worth about it?

tnimz

If you do 20 loops in 24 hours, then at most 8-10 of those searches would be done at night. For a country of 300+ million, I cannot see that raising ANY flags. Even if there were double or triple that many searches.

There are millions of Americans surfing the net at all hours of the night, whether they work late night shifts, or they are night owls, or they get up really early in the morning. :-)

Heck, if Casey weren't so busy providing support (nearly 24/7), he would most likely be clicking on all those links. ;-P

Tom

thesecret

How can this be, I am downloading the same package as you and I get only 30ish...maybe because I download in different time and most of them are dead already by then?, I am GMT+1 and I download it around 11am every day.

CSSwilson

I emailed for support and it asked me to open a support ticket and the support form is not working.,.....

this is what I get :"Fatal Error: Contact system adminstrator."

I keep getting an error Unhandled exception says access to path .....\Workinglog.txt is denied can someone help?

sknollii

Yep... My copy will not load (It shuts down immediately) and I cannot get into the support desk or the forum. Seems there is an issue with the primary server that should be allowing this software to run.

Casey, any feedback as to what is happening?

Thanks,

Sam

vetteran

Irrelevant. It's always night somewhere.

That's the point of using random times.

Unless you have data showing skewed search patterns?

vetteran

Try disconnecting your router and/or rebooting the pc.

Support is ok, I'm one of the responders.

tnimz

@vetteran

I believe Magic32 was referring specifically to US proxies.

However vetteran is correct, because I really don't believe there is any legitimate reason to only use US proxies. People from all over the world use Google.com (as opposed to their local Google) to search.

Tom

vetteran

chowyoungfat

"Just did more testing.
I tried with <5000 L1 proxies" What do you mean?

I've been using SES for well over two months and I am a support guy.
If you cannot get it to work then it's not, NOT SES.

You are doing something wrong.

vetteran

It won't be that as I test the list 3/4 times.

Do you have the TCP fix mentioned on the EPS site?

Try clicking the gear icon in EPS and clicking default, see if that helps.

vetteran

sknollii

That sounds like a local problem on your pc. Try getting Tune-up Utilities 2011
and let check your machine.

Another factor, are you using the same pc as before? SES is machine specific.

ElMundodelExito

The workinglog denied is a permissions error. You need to run the app as Admin.

Run the app as administrator (Right Click on the icon and "Run as Administrator". Also you can right click on the app, click on "Properties", then click on the "Compatibility" tab, and at the bottom check to always run as administrator.

If the above doesn't work.. try this solution :

Go to Control Panel>User Accounts and Family Safety>User Accounts>(at the bottom)turn UAC(user account control) on or off>turn UAC off, restart your computer.

Success,

takeaction24

Othe people don't have that problem so why only you. All issues have been fixed for people and if you set up everything correctly you can make it loop 15 - 20 times per day easily using the free proxies.

If you just needed some help all you had to do is ask. There are so many good people in here that have helped so many already. People always blame the software but it is not always the software's fault. The majority of the time it is something someone is doing wrong because they do not read or it is something on their computer.

takeaction24

IF You Are Not Getting the correct amount of L1 & L2 from Casey's List Please Try This First !

Try setting your TCP it worked for me. I dug out the post a wrote way back when I was having issues and immediately I saw a difference.

Maybe you are having the same trouble I had and they were all showing up as level 3 transparent. This took me a couple of days to work out but the reason for that is because In windows XP,Vista and windows 7 the TCP settings clash with the ESP proxy software and you have to download a patch. The patch allows you to change the settings and it works. At the start I was getting 10 or 20 level 1 and 2 and the rest were level 3 proxies but that is because the software was not working correctly with my xp.

this is what you have to do is go here and get the patch

http://www.softpedia.com/get/Tweak/Network-Tweak/TCP-Z.shtml

then you need to go here http://www.7-zip.org/ and download this in order to open the file.

Once open you need to set both the new values to 100 then apply and reboot and you are done.

If you are running XP you only need to do this once.

If you are running Vista or Windows 7 you need to do this everytime before testing the Proxies with esp.

Hope this helps anyone who was having the same issue as me.

tnimz

If I install SESniper on a VPS, will 500GB bandwidth per month be plenty?

I will be running about 5-10 domains for clients, with ~5 keywords each at a time.

(10 domains x 5 keywords x 20 loops x 31 days x 4MB = 124GB)

Is my calculation correct? Or am I missing something?

Thanks in advance!
Tom

tnimz

Please get your refund from Clickbank or PayPal, and stop wasting your time (and ours) on this thread.

L41db4ck

Ridiculous! He should have been refunded when he asked then he wouldn't be wasting time on this thread.

Clickbankreviewer

To those that were asking for more proxies from the one Casey gives us:

If you want a big list of proxies, you can email me at makemoneyin2011@aol.com. The key to this whole thing is putting the right keywords, having the right settings, and keep uploading two to three times a day the proxies since they died within a few hours. If you are serious and interested in this big list of proxies then email me. Please do not ask questions about this list in here. Thank you.

Clickbankreviewer

I have a question. If I have SES working and lets just say it has 3 loops in 12 hours and i see that is running slow and i test for the new L1 proxies to get some fresh ones that are working, Do I hit "stop" on SES, or do i hit "quit" button and exit the application completely and start over. I am thinking if I hit the stop button, then all I have to do is delete the old proxies, copy and paste the new ones and hit the get popular key to start over. I don't know if that affects the software or my results in anyway. Please advice...Thank you!

MisterE

Tom,

Number of search engines and number of threads?

Mark

youngward

the hits doesnt show up on stat counter...does anyone else have this problem?

linklover

It seems to me that just stopping does the trick.

I am beginning to see results on my Get Popular mode keywords.
Might have something to do with the re-tweek i did of all my settings and use of many more public proxies. Thanks CBR
I've dumped the 68 privates for now to reduce the chance of a footprint being discovered.

Just to be sure - using the same proxies over and over would do that right?

MisterE

Youngward,

Stat Counter uses Java, Sniper has no way to register a visit with Java based web pages or stand alone Java Scripts running on a website.

In addition to Java, another reason Stat Counter won't register a hit is because Stat Counter requires a 'User Agent' primarily a 'Browser Agent' to do it's thing. As of this time SES is unable to use 'User Agents'.

Mark

tnimz

(10 domains x 5 keywords x 20 loops x 31 days x 4MB = 124GB)

Thanks Mark,

So if I use Google, Yahoo and Bing, I need to multiply by 3? (= 372GB?)

Aren't the # of threads irrelevant to the equation if I'm counting by total # of loops?

Perhaps I understand that incorrectly, but if I have 20 loops per day, could that not be:
- 20 threads looping once every 24 hours
- 1 thread looping every 1.2 hours
- 10 threads looping every 12 hours
- 5 threads looping every 6 hours
- etc.

Is this correct? Or am I still missing something?

Thanks again,
Tom

youngward

thanks for the quick response. i understand. have a productive year

linklover

RE: L1 Proxies.

If you use only L1 proxies can the SE's see that you are using a proxy?
Can they see the ip address of that proxy?

tnimz

Is this a potential "footprint" issue?

Clickbankreviewer

power4ever are you referring to new product that just came out call automatic backlink creator

thesecret

I dont know about TPC fix. I will try with "Default" button in EPS.

MisterE

I'm not even going to do the math.... I just wanted to point out that you were missing one important variable... The number of search engines
Start with the fact that one loop is going to be 150 searches, now you will have to find the average search time and multiply that by the 150 searches, the answer will be in total minutes required to do one loop. Here's where your threads come in... For instance, if your average time was 10 minutes X 150 searches that would equal 1500 minutes, divide this by (let's say) 10 threads, you would get 1 loop every 150 minutes or 2 1/2 hours. If you had chosen 5 threads then it would be a loop every 5 hours, and 1 thread would take 25 hours.

Keep in mind that the searches are going to finish closer to the high end of the calculation. And, if you're using Sniper Mode you will also have to add in the average 'Sit' time to the average 'search time'.

As for the threads, yes, for this scenario it's not necessary. I mostly mentioned them because for any help that is wanted in regards to calculations all variables need to be included in the post. 'else the answer could go on forever trying to cover all the different possibilities.

So go back through your calculations and tweak them so that you get 20 loops in a 24 hour period. Just play with the figures and learn as your playing.

If after an hour or so you end up more confused, PM me and I'll do the math for you proper.

Mark

MisterE

For the search engines, and other interested parties Yes, and yes.

I won't explain why here at WF. But, if you are an owner of SES and have registered and turned green at the Sniper forum, then you will find a post I made recently explaining why and how.

It's perfectly fine at this point that they know this, the important thing about anonymous proxies is that it's extremely hard for them to find your IP number.

Mark

MisterE

The lack of a 'User Agent'?.... Yes.

Mark

linklover

The Sniper Forum?
Have I missed something?

linklover

What happens if i enter http:// in front of www.xxxxxxxxx dot com in the url field?

The instructions say dont do it.

MisterE

Go back through your download package and read everything again.

Mark

vetteran

Level 1 Proxies are anonymous and the destination cannot tell that it is a proxy.

Level 2 are also anonymous but the destination can tell that it is a proxy.

The question not yet settled is whether Google does detect that an search is coming
from a proxy IP and if so, whether the search ignored for counting.

kmachine

After almost 1 month doing this 24/7, I think that is time to ask for a refund. My results: Promoting only 1 website (almost 2 years old and the keyword is in the domain) from Dic19/10 Pos: 48 - to Ene12/11 Pos:52. Waste of time and money.

MisterE

Google has access to the ARIN database... Undoubtedly. And therefore knows the Network related to the IP range. Just because no ID is being sent does not mean that they aren't aware of the intent of the referrer.

In addition, almost every public and possibly private proxy is scraped on a daily basis to be filtered and added to subscription based Blacklists to prevent Spam and hackers.

Whether or not interested parties can tell if your referrer is a proxy is a moot point. Our intent of using L1's and 2"s is to make sure that our originating IP isn't included in the header info.

And for the question of whether or not the hit will be ignored or not is directly related to the 'User Agent' and 'Browser Agent' strings, if this info was sent along with the L1 or 2 they would have no choice but to count it as a hit. There is nothing illegal about using proxies. But, if the header is missing the Agent string then the SE's have no choice but to label the traffic as an anonymous 'bot.

Mark